Valuation methods

Land and Building Valuation Software for Banks in India

How lenders and valuers value a plot and the building on it, step by step, and which parts software can take over.

Prepared by Valzy Method guide

The short answer

For an independent house or building, lenders in India commonly value the land and the building separately. Land value is the plot area times a land rate backed by comparables and the guideline rate. Building value is the replacement cost of construction less depreciation for age. Land and building valuation software reads these inputs from the documents, finds the rates and works out both values, with a source behind each figure.

The land and building method

When a loan is secured by an independent house, a bungalow or a building on its own plot, the collateral has two parts that behave differently. Land tends to hold or gain value with its location. A building wears out with age and can be rebuilt at today’s construction cost. So valuers commonly value each part on its own basis and add them together:

Market value = land value + building value

The result is cross-checked against market evidence for similar properties and against the guideline value, before the valuer sets the realisable and distress values the lender asks for.

Valuing the land

Land value is the plot area multiplied by a land rate per square foot or square metre. The work is in finding a rate you can defend:

  • Plot area comes from the sale deed, khata or other title documents, and is checked against the site.
  • Comparables are recent sales and listings of similar plots nearby, adjusted for size, shape, road access and use.
  • The guideline value set by the state for registration is recorded alongside, as a reference. Read guideline value vs market value for how the two differ.
  • Location factors such as road width, water bodies, high-tension lines and nearby development can move the rate up or down.

Valuing the building

The building is usually valued at what it would cost to build today, less an allowance for its age:

  • Built-up area is taken from approved plans and documents and measured on site.
  • Permitted construction is checked with the FAR, or FSI, allowed for the plot. Built-up area beyond the permitted limit is a flag, and many lenders value only the permitted portion.
  • Replacement cost is the built-up area times a current construction rate for that type and quality of building.
  • Depreciation reduces the replacement cost for age and condition, commonly on a straight-line basis over the building’s expected life, as the lender’s policy sets.

A worked example

An illustrative independent house on a 2,400 sq ft plot with 3,600 sq ft built up, 10 years old:

Illustrative land and building valuation
StepInputResult
Land value2,400 sq ft × ₹21,800 per sq ft land rate₹5,23,20,000
Permitted construction2,400 sq ft plot × FAR 1.75 = 4,200 sq ft allowed3,600 sq ft is within the limit
Replacement cost3,600 sq ft × ₹2,000 per sq ft construction cost₹72,00,000
Depreciation10 years of age, at the rate the lender’s policy sets (15% here)−₹10,80,000
Building valueReplacement cost less depreciation₹61,20,000
Market valueLand value plus building value₹5,84,40,000

All figures are illustrative. The land rate, construction cost and depreciation depend on the location, the building and the lender’s policy.

What land and building valuation software should do

Each step above has inputs that are slow to gather and easy to get wrong. Good software takes those on and leaves the judgement with the valuer and the lender:

  • Read plot area, built-up area and building age from the khata or sale deed, and show the page each came from.
  • Find the guideline value for the plot, from map pin to survey number to sub-registrar office.
  • Pick comparables for the land rate from market data, remove outliers and show every adjustment.
  • Check built-up area against the permitted FAR and flag any excess.
  • Work out replacement cost and depreciation, with every input editable.
  • Put land value, building value, market, realisable and distress values in the bank’s report format.

Valzy’s property valuation software does each of these for lenders, and Valzy for valuers brings the same steps into the valuer’s report.

Frequently asked questions

What is land valuation software?

Land valuation software estimates the value of a plot from its area, location and market evidence such as comparable sales, listings and the guideline rate. For bank collateral it usually sits inside property valuation software that also values the building and prepares the report.

How do banks value an independent house in India?

A common approach is to value the land and the building separately: land as plot area times a land rate supported by comparables and the guideline rate, and the building as its replacement cost less depreciation for age. The two are added to reach the market value. Each lender’s valuation policy sets the details.

Why does FAR or FSI matter in a valuation?

FAR (floor area ratio), called FSI in some states, limits how much can be built on a plot. Comparing the built-up area with what the permitted FAR allows helps spot unauthorised construction, which many lenders treat differently in the valuation.

Is the land and building method used for flats?

Flats in a project are more often valued with a composite rate per square foot that already includes the share of land, supported by sales and listings in the same or nearby projects. The land and building method fits independent houses and buildings on their own plot.

For lenders

See land and building values worked out for you

Valzy reads the khata or sale deed, finds the land rate and guideline value, and works out the building value after depreciation, with every input on record.

Prepared by Valzy, a provider of property valuation software for lenders and valuers in India. The figures below are illustrative. Each lender’s valuation policy and the valuer’s professional judgement determine the method and the final value.